sales@stepmotordriver.com

   >   Driver Integrated Servo Motor

Driver Integrated Servo Motor

  • 100W Integrated Driver Servo Motor
100W Integrated Driver Servo Motor

100W Integrated Driver Servo Motor

  • Product description: stepper motor driver,servo driver,driver integrated servo motor,automation products,setpper motor controller,3-axis stepper motor controller
  • INQUIRY
TECHNICAL DATA
Model No. Specifciations
Capacity NM Voltage Pulse Qty.
YT057076DC024N0013 50W 0.16 DC24V 128
256
512
1024
2048
4096
8192
16384
YT057086DC024N0026 100W 0.32
YT060110DC048N0060 200W 0.60 DC48V
YT060130DC048N0120 400W 1.20
YT080150AC220N0240 750W 2.40 AC220V
CONTROL SIGNAL CONNECTOR
Pin Function Details
PUL+ (+5V) Pulse signal: Active at pulse rising edge ; 4-5V when PUL-HIGH, 0-0.5V when PUL-LOW. For reliable response, pulse width should be longer than 1.2μs. Series connect resistors for current-limiting when +12V or +24V used.
PUL- (PUL)
DIR+ (+5V) DIR signal:High level or low level Signal. For reliable motion response, DIR signal should be ahead of PUL signal by 5μs at least. 4-5V when DIR-HIGH, 0-0.5V when DIR-LOW. Please note that motion direction is also related to motor-driver wiring match(e.g.:A+,A- exchange). Exchanging the connection of two wires for a coil to the driver will reverse motion direction.
DIR- (DIR)
ENA+ (+5V) Enable signal: This signal is used for enabling/disabling the drive.When ENA+ connect to +5V,ENA- connect to low level(or inner Optocoupler conducted).The driver will cut off motor's all pahses current to ensure the motor in free status,the step pulse not be influence.Let the enable signal impending if don't need this function.
ENA- (ENA)
STRONG ELECTRICITY CONNECTOR
Pin Function Details
DC/AC DC24V/DC48/AC220V
GND Power Ground
+ AC / DC Anode
PULSE QUANTITY
Pulse Quantity is set by SW1,SW2,SW3 of DIP switch as following:
Pulse Qty. SW1 SW2 SW3
128 On On On
256 On On On
512 On On On
1024 On On On
2048 On On Off
4096 On On Off
8192 On On Off
16384 On On Off
DIRECTION OF ROTATION
SW4=On Corotation
SW4=Off Rollback



More Automation products on:www.Stepmotordriver.com  

close
Scan the qr codeClose
the qr code