Home > Multi-Axi Motion Control Cards > Ethernet(Stand-alone) Motion controller > SW8840,2MHz 4 Axis PCI BUS stand-alone Motion Control Cards Factory

SW8840,2MHz 4 Axis PCI BUS stand-alone Motion Control Cards Factory

  • SW8840,2MHz 4 Axis PCI BUS stand-alone Motion Control Cards Factory
  • SW8860 6 Axis stand-alone Motion Control Cards Factory

Product Abstract:

SW8840,2MHz 4 Axis PCI BUS stand-alone Motion Control Cards


Product Description

PMC Series Ethernet (Stand-alone) Motion Controller SW8840
1. Supplies ARM7 processor;
2. Supports G code;
3. TCP/IP communication protocol, has most function of PLC;
4. I/O:38/22

SW8840 is a 4 axis PMC (programmable motion controller) with PLC, multi-usages functions. It supports stand-alone running mode, online real time control mode and console running mode, which can protect users’ technology and conveniently for users to develop it.

Under stand-alone running mode, it can apply PLC to program and control, at the same time can use parts of G codes. Under online real time control mode, any third software can visit the PMC’s internal register through Modubus.

  • Switching quantity inputChannel: 32, all optical coupling isolation;
  • Input voltage: 5-24V;High level > 4.5V;Low level < 1.0V;
  • Isolation voltage: 2500V DC;Optical coupling input delay:≤0.1ms;
  • Counting inputChannel: 4AB phase coding input, all optical coupling isolation (multiplexing with 8 input switching quantities);
  • Maximum counting frequency: 2MHz;
  • Input voltage: 5-24V;High level > 4.5V;Low level < 1.0V;
  • Isolation voltage: 2500V DC;
  • Pulse outputChannel: 4-axis pulse, 4-axis direction, all optical coupling isolation;
  • Maximum pulse frequency: 2MHz;Output type: 5V differential output;
  • Output mode: pulse + direction, or pulse + pulse;
  • Switching quantity outputOutput channel: 18, all optical coupling isolation;
  • Output type: NPN collector open circuit 5-24 VDC, rated current: 0.5A;maximum current of single channel: 1A;
  • RS232 communication rate (bps): 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200.

Expansion board + Serial port line + Flat cable + USB download line + Ethernet communication cable

 

 

 

 

 

  • Applies 66MHZ main frequency, 32 bits of RISC CPU; 4-axis servo/step control; kinds of single-axis or multi-axis motion;
  •  

     

     

     

     

     

     

     

  • Random 2-4 axis linear interpolation, cache interpolation and 2 axis arc interpolation;
  •  

     

     

     

     

     

     

     

  • Variety control ports: 4 axis pulse output, 4 axis encoder input, 32 channels optical coupling input, 17channels optical coupling output;
  •  

     

     

     

     

     

     

     

  • U disk connection: It makes more convenient to upgrade data and program;
  •  

     

     

     

     

     

     

     

  • Ethernet slot R32 interface: It can realize its network and remote control on sets of automation equipments.
  •  

     

     

     

     

     

     

     

  • Super program memory capacity: Up to 64M, which can meet kinds of programs’ running and processing easily;
  •  

     

     

     

     

     

     

     

  • Internal output circuit has protection on over-current, over-voltage, over-heating, and short circuit;
  •  

     

     

     

     

     

     

     

  • Outage protection function.
  •  

     

     

     

     

     

     

     

  • Application environment
    • Power supply: DC 24V;
    • Power consumption: 3.6W-5.0W;
    • Operating temperature: 45°C
    • Storage temperature: -40°C-55°C
    • Operating humidity: 40%-80%;
    • Storage humidity: 0%-95%
    Accessories

    Model

    Description

    Quantity (piece) 

    ADT-D9MM

    Data line, 9 pins

    L13

    USB Line

    1

    DBT15G

    Wiring head, 15 pins

    4

    DBT09G

    Wiring head, 9 pins

    1

    DB-E63A015

    Shell of DBT15G

    4

    DB-E63A009

    Shell of DBT09G

    1

    CD

    SDK (software development kit)

    1

     

    User manual

    1

  •  

     

     

     Applications:

     

     

  • Engraving and milling machine;
  •  

     

     

     

  • adhesive injecting machine;
  •  

     

     

     

  • drilling machine;
  •  

     

     

     

  • Spraying machine;
  •  

     

     

     

  • bonding machine;
  •  

     

     

     

  • 4-axis robot, etc.
  •  

     

     

     

  • Find more Automation Control products on Sunwind’s Homepage:Sunwind Automation
  •  

    Related Products

    Inquiry Information

    • *Subject:

    • *Content:

    • *Telephone Number:

    • *Your E-Mail:

    • *Confirm Text:

      captcha

    Contact Us